How much fuel does a 600hp use?
How much fuel does a 600hp use?
Making the Choice
| Fuel Pump Free Flow | Carbureted Engine | Fuel Injected Engine |
|---|---|---|
| 50 gph/190 lph | 600 hp | 500 hp |
| 67 gph/255 lph | 750 hp | 650 hp |
| 90 gph/340 lph | 1000 hp | 850 hp |
| 125 gph/470 lph | 1300 hp | 1000 hp |
How much HP does a Gen 3 6.0 LS have?
345-hp
The LQ4 and LQ9 6.0-Liter Gen IIIs The LQ9 engine is the high-performance 345-hp version that was first available only in the Cadillac Escalade.
How much hp can a mechanical fuel pump support?
Registered. A good rule of thumb is 1/2 lb of fuel per hp per hour with gasoline.So 650 hp =375 lbs per hr.
How do I calculate HP fuel consumption?
Pen and Paper Method
- Formula To Estimate Maximum Engine Fuel Consumption. Gallon Per Hour (GPH) = (specific fuel consumption x HP)/Fuel Specific Weight.
- 300-hp Diesel Engine Example. GPH = (0.4 x 300)/ 7.2 = 105/7.2 = 16.6 GPH.
- 300-hp Gasoline Engine Example.
- Other Related Resources:
Does horsepower affect fuel consumption?
Horsepower is a major factor in a vehicle’s fuel consumption. More power generally means higher fuel consumption. This means you can save money on fuel, and reduce your impact on the environment, by choosing a vehicle with no more horsepower than you need.
How much horsepower can a 6.0 handle?
Even a decade ago, before PCM tuning was anywhere near as refined as it is now, several 6.0L owners proved the 6.0L’s bottom end could withstand 700-rwhp. Today, a lot of serious enthusiasts conclude that the 800 hp 6.0 Power Stroke range gets you into unchartered waters with a 6.0L.
How much horsepower can a ls 6.0 make?
The 6.0-liter LS engine produces 300 horsepower at 4,400 rpm and 360 pound-feet of torque at 4,400 rpm. It has a maximum engine speed of 5,600 rpm.
Is mechanical or electric fuel pump better?
-When do you need an electric fuel pump? Usually, a mechanical pump is preferred over an “aftermarket” electric fuel pump. They tend to be more reliable. However, sometimes that won’t work.
How big of a fuel pump do I need?
A good estimator of volume to power is approximately 10 hp per gallon or 2.64 hp per liter. For example if your pump flows at 50 gph it should be able to support a 500 hp engine (50 x 10 = 500). However, to actually know the gph you must also consider the fuel pressure required for your engine.
How much fuel is in a horsepower?
On average, an in-tune four-stroke gasoline engine will burn about 0.50 pounds of fuel per hour for each unit of horsepower.
What speed is best for fuel economy?
55-65mph
The Energy Saving Trust says that the most efficient speed you can travel in a car in terms of achieving the best fuel economy is 55-65mph. Any faster, though, and the fuel efficiency decreases rapidly. For example, driving at 85mph uses 40% more fuel than at 70mph (oh, and it’s illegal too). 8.
Does higher horsepower use more fuel?