Do water powered sump pumps really work?

In multi-day power outages, this might mean the difference between a dry or flooded basement. The Basepump water powered pumps that we sell are very efficient, as well, removing 2 gallons of sump pit water, for every 1 gallon of city water used.

How much does it cost to install a water powered backup sump pump?

Installation Cost Water-powered sump pumps cost $120 to $390 per unit. And the installation fee will cost $45 to $200 per hour. Installation can take two to four hours but can vary depending on the project complexity.

How does a water powered back up sump pump work?

A water powered sump pump functions by taking the existing water from the city or town supply. The city water flows through a constricted area, and is forced through an ejector. At that constriction water speed increases causing a pressure reduction. This pressure reduction literally sucks water from the sump crock.

How much water does a water powered sump pump use?

A water powered sump pump uses 1 gallon of your city water to pump out either 1 or 2 gallons of water from your sump pump basin. Using the ratio of 1 to 2 at 1,000 Gallons Per Hour (GPH), this system will use 5,000 gallons of water to prevent 10.000 gallons from flooding the basement.

What is the alternative to a sump pump?

Some potential alternatives to a sump pump are french drains, ground grading and gutters to improve drainage away from the home.

How can I power my sump pump without electricity?

Fill your generator with fuel. Plug your extension cord into your generator and start it. Connect your sump pump to the extension cord and make sure the pump starts running. Keep an eye on the water level to make sure it is working properly.

Which is better battery or water backup sump pump?

If the power outage outlasts the battery charge, you will effectively have no pump and your basement can quickly flood. However, water-powered pumps will run for an unlimited amount of time.

Is a battery backup sump pump worth it?

Sump pumps are a necessity for the modern home, so make sure it has all the protection it needs. A backup sump pump ensures that the excess water caused by rain does not flood your basement when the primary pump fails. With that in mind, the choice to install a battery backup is a no-brainer.

Do sump pumps use a lot of electricity?

The average sump pump uses about 10 kWh of power per month.

Can you have a basement without a sump pump?

If your house is built on a concrete slab (no basement) then odds are there is no sump pump. Sump pumps are designed to take water that surrounds your foundation and pump it outside before it can seep into your basement. So—no basement—no need for a sump pump.

Should every house have a sump pump?

It is a myth that any home needs a sump pump and drain tile system. These systems are at best a temporary emergency fix for a problem of water leaking in the basement. They should never be relied on to pump water out of your basement continually.

Do you need a generator for a sump pump?

Types of Backup Power for Sump Pumps: Portable generators can power your sump pump (among other appliances) for days as long as you’ve got gasoline ready to use. In addition, a 5,000 to 7,000-watt generator can keep your refrigerator, furnace, and other critical appliances running.