How do you calculate 54 wallpaper?

Find the total square feet of the wall(s) by multiplying ceiling height by total wall length. Subtract areas that will not be covered….For example:

1. 54-inch wide material used to cover 1500 square feet is figured.
2. 54 divided by 12 = 4.5.
3. 4.5 multiplied by 3 = 13.5 square feet per linear yard.
4. 1500 divided by 13.5 = 111.11.

How many rolls of wallpaper do I need for 1 wall?

Divide the total square feet of wall space by 27 to determine the number of rolls required. The formula is: Square footage ÷ by 27 = Number of rolls. At this point, you could subtract 21 square feet for any doors and 15 square feet for each window.

How do you calculate wallpaper in meters?

Convert your measurements to feet or meters. If you found the length in centimeters, divide the measurements by 100 to calculate the wall dimensions in meters. For example, if your wall is 120 inches (304.8 cm) long, divide it by 12 inches (30.48 cm) to find it’s length in feet or meters, which is 10 feet (3.0 m).

How do I calculate how much wallpaper I need?

Measure the width of each wall where you would like to apply the wallpaper and add them all together (“Combined Width”). Measure the height of the walls. Multiply the Combined Width by the height of the walls – this is the total square footage (“TSF”) of wall space you need to cover with wallpaper.

How much wallpaper does 2 rolls cover?

57 to 61 square feet
Depending on the wallpaper sheet width, a double roll covers 57 to 61 square feet, while a single roll is 29 to 31 square feet.

How do you calculate square feet?

To calculate feet squared (or sq. ft. for short), determine the length and width of the area you are working with, measured in feet. Multiply the length by the width and you’ll have the square feet.

How do you calculate square Metres?

Multiply the length and width together. Once both measurements are converted into metres, multiply them together to get the measurement of the area in square metres. Use a calculator if necessary.

How many square meters is a roll of wallpaper?

5 m2
Standard wallpaper rolls made n Europe have dimensions of 10.05 m x 0.53 m, which amounts to 5 m2 (square meters).

How many square feet is a roll of wallpaper?

about 35 square feet
A standard American roll of wallpaper gives you about 35 square feet, but waste and pattern matching usually takes this down to about 27 usable square feet per roll. Enter the total of all wall widths, in feet, in the room.