How wide is Kerdi-band?

How wide is Kerdi-band?

Use KERDI-BAND (KEBA 100), in widths of 5″ (12.5 cm), 7-1/4″ (18.5 cm), or 10″ (25 cm) to seal butt joints or corner joints.

How wide is a Schluter Kerdi curb?

The curb can be used in conjunction with KERDI-SHOWER-T/-TS/-TT shower trays or mortar bases and is available in three sizes, 38″ x 6″ x 4-1/2″ (97 x 15 x 11.5 cm), 48″ x 6″ x 4-1/2″ (122 x 15 x 11.5 cm) and 60” x 6” x 4-1/2” (152 cm x 15 cm x 11.5 cm).

How thick is the Schluter system?

Waterproofing strip: Schluter®-KERDI-BAND KERDI-BAND is only 4 one-thousands of an inch (4 mil)-thick, half the thickness of KERDI thus limiting buildup, and ensuring a smooth surface for tile installation.

What size are Schluter boards?

With the available panel thicknesses of 3/16″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, 1-1/2″, and 2″ (5, 9, 12.5, 15, 19, 25, 38, and 50 mm), KERDI-BOARD allows the installer to prepare and create a broad range of substrates and building elements for the installation of ceramic and natural stone tile that are flat, level, plumb.

Can you use KERDI membrane instead of Kerdi band?

There are plenty of seams that are easier to cover with a single piece of membrane rather than several pieces of band. It’s also easier to use cutoffs from the membrane for this rather than having wide kerdi band on hand at all times for that one 6″ seam.

Can I use Schluter all set for Kerdi band?

Schluter ALL-SET® is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter®-Systems’ uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter®-Shower System, and KERDI-BOARD.

How wide should a shower curb be?

The recommended minimum width of a shower curb is 36 inches although some shower curbs can be 42 or 48 inches wide. The standard height of a shower curb is 2 inches above the top of the drain. The shower curb contains the water spray from your shower so that it doesn’t splash to the floor outside.

How tall is a Kerdi curb?

KERDI-BOARD Shower Curb 48″ x 6″ x 4-1/2″

How thick is Schluter Kerdi membrane?

8-mil thick
The material is physiologically safe and does not require special disposal. KERDI is 8-mil thick and has a water vapor permeance of 0.90 perms, when tested according to ASTM E96, using Procedure E at 90% relative humidity.

How thick are the Kerdi tray?

36″ x 36″ Center – 7/8″ perimeter thickness. 36″ x 48″ Center – 1″ perimeter thickness.

Can I use KERDI-BOARD instead of cement board?

It’s a lightweight polystyrene board faced with Kerdi that comes in various thicknesses that you can use in place of drywall or cement board.

What is Schlüter Kerdi Line D?

Schlüter®-KERDI-LINE-D is a frameless channel cover to match Schlüter®-KERDI-LINE channel bodies. The covering support features a fleece fabric for bonding with the tile adhesive and is universally suitable for all covering thicknesses.

What sizes does Schluter®-Kerdi come in?

• Available for wall or intermediate drain placement in two sizes: 39″ x 39″ or 55″ x 55″ • Schluter®-KERDI waterproofing membrane laminated to the surface

What is the installation height of Schlüter®-Kerdi-line-V?

Schlüter®-KERDI-LINE-F is particularly well suited for renovation projects due to its low assembly height of just 60 mm. If drainage through a floor level is a possibility, an installation height of ≥ 24 mm can be achieved with Schlüter®-KERDI-LINE-V.

What is a Kerdi line?

Schlüter®-KERDI-LINE-GTO is an odour trap with a silicone dry flap. It can be used instead of the two-piece odour trap and prevents the formation of odours that can occur in seldom-used drain systems (in guest bathrooms, vacation homes etc.) when the odour trap unit dries up. With a drain capacity of at least 0.