Is there a fuse for my trailer lights?

Is there a fuse for my trailer lights?

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side trailer connector using a circuit tester such as # 40376.

What happens when a fuse blows?

Inside the fuse, there is a metal ribbon through which all the current on the circuit passes. The ribbon is sized to match the circuit wire gauge, and if too much current passes through the ribbon, it melts through, or “blows,” and the circuit goes dead.

Why am I not getting power to my trailer lights?

Many trailer problems are due to a poor grounding connection, which is usually the white wire coming out of the trailer plug. If the ground is poor, lights may work intermittently or not at all. Even if the wiring to the plug is adequate, make sure that the ground connections to the trailer frame are good.

Where is the internal fuse box?

The interior fuse box is underneath the steering column. The under-hood fuse box is in the engine compartment next to the battery. If something electrical in your vehicle stops working, the first thing you should check for is a blown fuse.

How do you know if fuse is blown?

Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

Why is there no power to my trailer plug?

If they are clean or still no power after cleaning, I would check your grounding connections. Make sure your grounds are firmly connected to a clean, bare metal surface. Next, test the pins on the connector where the wiring harness plugs into the truck using a circuit tester like Item # 40376.