What is a HWIC card?

There are several types of Cisco Interface Card. Cisco introduced the High Speed WIC, or “HWIC” with the x800 series of Cisco Integrated Service Router including the 1800, 2800, and 3800 series’. The HWIC interface is limited to 400 mega-bits per second bandwidth bidirectional.

What is WIC 2T card?

WIC-2T Cisco 2-Port Serial Wan Interface Card. The dual serial port WIC-2T provides higher levels of serial port density than a single WAN interface card and is supported on the Cisco 2600 series and supports speeds of up to 2.048Mbps.

What is Hwic 1GE SFP?

HWIC-1GE-SFP Specification The single-port Cisco Gigabit Ethernet HWIC provides Gigabit Ethernet optical and copper connectivity in a compact form factor for all Cisco 2800 and 3800 series integrated services routers, except the 2801.

How do you set up a WAN?

How do I edit WAN settings?

1. Open the Google Home app .
2. Tap Wi-Fi Settings. Advanced Networking.
3. Tap WAN.
4. Choose DHCP, Static, or PPPoE.
5. Make any changes, then tap Save .

How do I access my WAN interface?

To configure a WAN interface: Go to the NETWORK > IP Configuration page….If you have a dynamic connection such as PPTP or PPPoE:

1. In the Dynamic Interface Configuration section, click Add Dynamic Network Interface.
2. Configure the dynamic interface settings.
3. Click Add.

What is a WAN port?

(Wide Area Network port) The socket on a network device that is wired to an external network, which is typically the Internet. In the home and small office, a WAN port is an RJ-45 Ethernet port on a router that is wired to a cable, DSL or FiOS modem.

What is a WAN port number?

In the home and small office, a WAN port is an RJ-45 Ethernet port on a router that is wired to a cable, DSL or FiOS modem. On small routers, the WAN port is often labeled “Internet.” Contrast with LAN port.

How do I activate WAN?

Insert your wireless router’s AC adapter to the DC-IN port and plug it to a power outlet. Use another network cable, connect your modem to your wireless router’s WAN port. Use the bundled network cable, connect your computer to your wireless router’s LAN port.

What is a dual serial WAN interface card?

The dual-serial port WAN interface cards (WICs) for the Cisco 2600 and 1700 series feature Cisco`s new, compact, high-density Smart Serial connector to support a wide variety of electrical interfaces when used with the appropriate transition cable. Two cables are required to support the two ports on the WIC.

How many serial ports does the wic-2t provide?

The WIC-2T provides two serial ports using the Smart Serial connector. Asynchronous support with a maximum speed (per port) of 115.2 Kbps, minimum 600 bps.

Can the Cisco nm-1e1r2w modules support wic-2t?

The Cisco 1600 Series is not capable of supporting the WIC-2T due to lack of Serial Communications Controllers. The NM-1E2W, NM-1E1R2W, and NM-2E2W Network Modules do not have enough performance power to support the WIC-2T due to hardware limitations.