What is HYDRO BAN used for?

What is HYDRO BAN used for?

HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

How do you use cementitious waterproofing?

Advantages of cementitious waterproof coating

  1. It is easy to apply and it is available at any hardware store or masonry supply shops.
  2. These coatings are handled similarly to cement, mix it in with water until it achieves the right consistency and can be applied using a stiff-bristled brush.

Can you tile over HYDRO BAN?

Tile can be installed on HYDRO BAN Sheet Membrane immediately after installation with LATAPOXY 300 Adhesive or any suitable tile installation mortar.

How long does HYDRO BAN last?

Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored at temperatures >32°F (0°C) and <110°f (43°c).>

What is laticrete used for?

The ultimate, lightweight one-step, polymer fortified, Large and Heavy Tile mortar for interior and exterior installation of ceramic tile, porcelain tile, glass tile, stone, quarry tile, pavers and brick.

What are the 4 steps to waterproofing?

4 Steps for Waterproofing Pools

  1. Smooth the Substrate.
  2. Clean the Substrate.
  3. Apply the Waterproofing Membrane.
  4. Test for Leaks.

Is cementitious waterproofing good?

Cementitious products are considered some of the easiest waterproofing materials to mix and apply, and they provide a very solid and durable coating when acrylic additives are mixed into the cement. The materials involved are easy to obtain, and are particularly suited to wet areas like bathrooms.

What is liquid waterproofing membrane?

Liquid-applied membrane (LAM) is a monolithic, fully-bonded, liquid-based coating suitable for many waterproofing and roofing applications. The coating cures to form a rubber-like elastomeric waterproof membrane and may be applied over many substrates, including asphalt, bitumen and concrete.

What is waterproof membrane?

A waterproofing membrane is a thin layer of material used to prevent water from contacting another material that it is placed over. Waterproofing membranes may be adhesive or simply laid on top of the material they are supposed to protect.

What’s the difference between LATICRETE Hydro Ban and hydro barrier?

The key difference is Hydro Barrier requires fabric to be used in all the corners and seams while Hydro Ban does not. There is also a color difference – Hydro Ban is sage color and will dry to an olive green color while Hydro Barrier is a light blue and will dry to a dark blue color.

How long does laticrete take to dry?

Allow LATICRETE 9235 Waterproofing Membrane to cure for a minimum of 7 days at 70°F (21°C). Cooler temperatures require longer cure times. Allow the second coat of LATICRETE Hydro Ban liquid to dry to a uniform olive green color then allow two full hours cure at 70°F (21°C) prior to commencing the flood test.

What is 9235 waterproofing membrane?

9235 Waterproofing Membrane is a thin (.02” [.5mm]), load bearing, flexible, liquid applied waterproofing membrane system consisting of a liquid rubber polymer that is cold applied with an integral reinforcing fabric to provide a seamless waterproof membrane.

What is a tcna 9235 rating?

“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test). 9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations.

What is a self-curing waterproofing membrane?

A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.