How do you use green to blue HTH?

Set the multiport valve to the FILTER position and set the timer to run for 12 continuous hours; turn the pump on. Sprinkle the contents of PACK 1 around the sides of the pool. Then separately sprinkle the contents of PACK 2 around the side of the pool. Brush all visible algae off pool walls and steps.

How quickly can you turn a pool from green to blue?

You need to raise the level of your chlorine – shock the pool – and maintain that high level until all the algae is dead. This may take 3 to 4 days.

How long does green to blue take to work?

Fight a severe algae bloom and transform your swimming pool water from green to blue in 24 hours with this easy-to-use system. This Cal Hypo based formula transforms water from green to blue within 24 hours without adding cyanuric acid (CYA) to prevent overstabilization or chlorine lock.

How can I clear my green pool fast?

Follow the below steps to clear up your green pool in 24 hours:

1. Test the pool water.
2. Balance your chemicals and PH accordingly.
3. Remove any debris.
4. Shock the pool.
5. Brush the pool.
6. Vacuum the pool.
7. Run the pump for continually for 24 hours.

How long does it take a green pool to clear up after being treated?

The fastest way to clean a green pool is by using pool chemicals and your pool filter. This process usually takes around 4-5 days but you will start noticing a major improvement after 24 hours.

How do I change my pool from green to blue?

How to turn your pool from green to blue in six simple steps

1. Remove leaves and debris.
2. Clean the pump and filter.
3. Vacuum the pool.
4. Chlorinate the water.
5. Scoop and vacuum.
6. Begin regular maintenance.

How do you fix a green pool fast?

How to Fix Green Pool Water Fast

1. Brush the Pool Walls and Floor.
2. Test The Alkalinity and pH Level.
3. Shock Your Pool with Chlorine to Kill Algae.
4. Run Your Pool Filter for 8 Hours (And Shock Again If Needed)
5. More Water Testing and Adjust Pool Chemicals.

What to do if pool is still green after shocking?

If you still can’t see the bottom after shocking your pool, you may need to add a clarifier or flocculant the next day to remove the dead algae. Flocculant binds to small particle impurities in the water, causing them to clump together and fall to the bottom of the pool.

Why is my pool still green after shocking it?

Algae will remain in your pool after shock if you’ve had insufficient chlorine and an overabundance of metal elements in the pool water. Therefore, to start the cleaning process. Remove all the debris from the pool with a leaf net and then let the smaller dirt fragments settle.