What is the difference between male and female Molex?
What is the difference between male and female Molex?
The Molex connector is one where the male/female terminology is a bit odd. The female connector is usually found on the end of a cable, and it slips inside of a plastic shell which surrounds the male pins on the male connector.
Are all Molex connectors the same?
There are three typical pin sizes: 1.57 mm (0.062 in), 2.13 mm (0.084 in), and 2.36 mm (0.093 in). The 1.57 mm pin can carry 5 A of current, while the 2.36 mm can carry 8.5 A. Because the pins have a large contact surface area and fit tightly, these connectors are typically used for power.
What is a Molex connector used for?
Also known as a Molex power connector (pictured), it connects your computer power supply to drives and devices inside the computer.
Can I use 2 Molex to power GPU?
Just do it the exact same way with the adapter and plug the adapter end into the GPU and you’re good to go. Also, the adapter has to be for the PCI-E cables, it has to have the exact same amount of pins and either be male or female. Also, as long as your PSU is fine and the adapters work with it, continue using it.
How can you tell if a connector is male or female?
The difference between Male and Female connectors is simple. Just like people the Male has a sticking out “pin” which he plugs into something. The Females on the other hand have a “hole” in which to receive something, usually a “pin”!
What does a male connector look like?
A male connector is commonly referred to as a plug and has a solid pin for a center conductor. A female connector is commonly referred to as a jack and has a center conductor with a hole in it to accept the male pin.
Are Molex connectors universal?
USB connectors and cable assemblies provide a complete universal serial bus interconnect system for I/O devices. Molex USB products are available in standard, micro, mini, industrial and automotive styles to fit any application need.
What size is my Molex pin?
Molex’s Standard . 093″ pin and socket power terminals are an industry standard connector system based on a . 093″ pin diameter. Molex’s 2.36mm diameter terminals are used in the 5.03mm pitch Standard .
Is Molex 5V or 12V?
Integrated serial ports on older systems use +12V; while on newer systems, they use +3.3V or +5V. All the other plugs coming out of the power supply—called Molex connectors—are for drives, and they provide +12V (yellow) and +5V (red) power, as well as two ground wires (black).
Is Molex better than SATA?
Technically Molex can carry much more power than the SATA power connector. Molex has 2 power pins (one 5V and on 12V pin), each can deliver 11Amps for a total of 22Amps. The other 2 pins are ground wires… SATA power connectors has a total of 15 pins of which 9 are power pins (3 x 3.3V, 3 x 5V, 3 x 12V).
How much watts can Molex handle?
The ATX standard for SATA or Molex connections is rated for 54 watts. Each SATA/Molex connector provides three 12v pins at 1.5 amps each, for a total of 4.5 amps. 12 volts, times 4.5 amps, equals 54 watts able to be provided by a SATA/Molex connector.
Can you convert Molex to 8 pin?
Product Description. Features: The COMeap 4 pin Molex Male to 8 pin (4+4) EPS-12V cable is to convert molex 4 pin male to EPS-12V 8 pin(4+4) male. Mostly, EPS-12V is required by Dual, Quad CPU and Server Motherboards.
What products are available with Molex connectors?
Exit Devices: 24/25
Do I need a Molex connector?
Safe, yes. Usable, not necessarily. A Molex to SATA connector should be fine for most HDDs and DVD Drives but it may not be sufficient for more modern SSDs and BluRay drives. The SATA power connector includes a 3.3 volt rail as well as the traditional 5 volt and 12 volt rails.
Where to buy Molex connectors?
You can find Molex wire-to-board connectors with Molex distributors in Austria. Molex micro products can be used in applications ranging from mobile devices to a wide variety of hand held units and beyond.
How much power does a simple Molex connector provide?
You’re talking something on the order of 110W to power 10 drives (load wattage of the WD2002FAEX for instance is 10.7W), or just about 9A on the 12V rail. Single molex is supposedly capable of handling 11A on the 12V pin.