What is the difference between the RM 250 and the RMX 250?

What is the difference between the RM 250 and the RMX 250?

The RMX came with a wider ratio 5-speed than the RM, different porting/timing/carburetor for more low-end, slightly softer suspension, larger gas tank, and a softer seat. If you must have a street-legal 2-stroke, you may try finding a used ’98 RMX250, then add a mirror, brake light, and a Baja hi/low beam headlight.

What years did Suzuki make the RMX 250?

The History of Suzuki’s RMX250 1989-1998.

Is a RMX 250 a 2 stroke?

It’s been some time since we here at Trail Rider had a chance to swing a leg over Suzuki’s championship-winning RMX….Suzuki RMX 250S.

Make Model Suzuki RMX 250S
Engine Two stroke, single cylinder
Capacity 249 cc / 15.2 cu in
Bore x Stroke 67 mm x 70.8 mm
Compression Ratio 9.9 – 9.2 – 8.1:1

What does RMX stand for Suzuki?

What Does Suzuki Rmx Stand For? Suzuki has produced models of its RM series motorcycles, which are range of two-stroke motorcycles manufactured by Suzuki. Racer motorcycles use the suffix “RM” in their name designation because it stands for “Racing Model.” In motocross racing, this prefix will appear.

What is the difference between Suzuki RM and RMX?

The RMX came with a wider ratio 5-speed than the RM, different porting/timing/carburetor for more low-end, slightly softer suspension, larger gas tank, and a softer seat.

What was the last year for the RMX 250?

The 1997 RMX will likely be the final year of this, the first generation of the model line.

What does Rmz stand for Suzuki?

The RM series is a model range of two-stroke motorcycles manufactured by Suzuki. The letters “RM” stand for “Racing Model” and the motorcycles produced with this prefix in their model names are suited to use in motocross racing.

Is a Suzuki RMZ 250 a 4 stroke?

The 2021 Suzuki RM-Z250 is a quarter-liter motocrosser designed for competition. It utilizes smartphone-based technology with the MX-Tuner 2.0 system to dial in its 249cc liquid-cooled DOHC four-stroke engine.

What was the last year RM 250?

2008
The Rm250 was discontinued by the 2008 model year. This may possibly be related to changed class structure. From 1999 to 2004, changes to the RM250 made 15 more stock horsepower, and a lower seat height.

How do you tell what year a Rm250 is?

Just looking at the pattern in what you have of the frame number, that 8 before the A would be my guess as the year digit. If you do get the whole number it’s the 10th digit in which indicates the year if you weren’t aware.

How much HP does a RM250 have?

45.5 horsepower
Q: WHAT DOES THE RM250 DO ON THE DYNO? A: It pumps out 45.5 horsepower. Not bad, especially given the RM’s snappy and responsive feel.

Is the Suzuki RMZ 250 a good bike?

Overall, the RM-Z250 is a quality motorcycle with plenty of power and good components. It might not be winning shootouts, and it doesn’t have the most power on the dyno, but that does not take away from the fact that it is still a good bike.

When did the Suzuki rmx250 come out?

Suzuki dove back into the off-road arena with their RMX250 in 1989. It came off of the success of Randy Hawkins winning National Enduro titles on a modified RM250 in 1988 and before switching to the RMX the next year. Randy went on to win four more titles for Suzuki mounted on a modified RMX250.

How good is the RM250 Fork?

To cut to the chase, this fork works good, at least as good as the new Marzocchi units. On top of that seemingly earth-shattering news from Japan, front end changes are just the tip of the iceberg on the RM250.

Is the Suzuki RMX still a good off-roader?

Quite frankly, since the RMX has remained largely unchanged since its 1989 debut, it was hard to get excited about yearly refinements and BNGs. For 1996 however, Suzuki has done considerably more than improve an existing, albeit competitive off-road line.

Are the KTM RMX slider forks good?

For one, the entire 1996 RM based line, including the RMX, have followed KTM’s lead in the return to conventional slider forks. Fine twin chamber units are used on the RM, while the RMX gets a unique conventional slider cartridge-type fork. To cut to the chase, this fork works good, at least as good as the new Marzocchi units.